ARDUINO-BASED AUTOMATIC SOLAR PANEL TRACKING SYSTEM

Authors

  • Mr. P. RUSHIKESH RAO Author
  • A. Manasa Author
  • B.Azad Mohan Author
  • M. Shireesha Author
  • M. Manoj Author

DOI:

https://doi.org/10.64751/w34qby18

Abstract

Solar photovoltaic panels are now common on rooftops, farms, and street furniture, but most of them are mounted at a fixed angle facing south. The sun moves across the sky through the day and changes its elevation through the year, so a fixed panel receives direct sunlight at the best angle for only a short part of each day. In the morning and late afternoon, much of the available energy is lost because the light falls on the panel at a steep angle. This paper presents an Arduino based automatic solar panel tracking system that keeps a panel pointed towards the sun and measures the resulting gain in electrical output. The tracker uses four Light Dependent Resistors arranged in a cross with small opaque partitions between them, so that the LDRs receive equal light only when the sensor faces the sun directly. Each LDR is connected in a voltage divider and read by the analog inputs of an Arduino UNO. The controller compares the east and west readings to find the azimuth error and the top and bottom readings to find the elevation error, and drives two MG996R servo motors to reduce both errors. A dead band and a minimum light level prevent unnecessary movement on cloudy days and at night. The electrical output of the panel is measured throughout the day. An INA219 sensor records panel voltage, current, and power, and the Arduino integrates the power to calculate energy in watt hours. The panel charges a 12 V lead acid battery through a PWM charge controller, and the same battery supplies the servos and the electronics through a buck regulator, so the tracker is self powered. An ESP8266 module sends the readings to a cloud dashboard, where the output of the tracking panel can be compared with that of an identical fixed panel installed beside it. Because the tracker itself consumes energy, the design keeps this consumption low. The servos are moved only when the error exceeds the dead band and are detached between movements, and the controller checks the sensors every thirty seconds instead of continuously. The paper also discusses how tracking relates to maximum power point tracking, which adjusts the electrical operating point of the panel, and shows that the two methods are complementary rather than alternatives.

Downloads

Published

2026-11-17

How to Cite

Mr. P. RUSHIKESH RAO, A. Manasa, B.Azad Mohan, M. Shireesha, & M. Manoj. (2026). ARDUINO-BASED AUTOMATIC SOLAR PANEL TRACKING SYSTEM. International Journal of AI Electrical Civil and Mechanical Engineering, 2(4), 233-240. https://doi.org/10.64751/w34qby18