DESIGN OPTIMIZATION OF COMPOSITE LEAF SPRINGS USING RESPONSE SURFACE METHODOLOGY: A REVIEW
DOI:
https://doi.org/10.5281/zenodo.22841349Abstract
Leaf springs remain the most widely used suspension elements in commercial and heavy-duty vehicles because of their simplicity, load-carrying capacity and ability to combine the functions of a structural link and an energyabsorbing spring. Conventional multi-leaf steel springs, however, are heavy, corrosion-prone and susceptible to fatigue cracking at the eye ends and centre-clamp region, and their mass contributes directly to unsprung weight, ride discomfort and higher fuel consumption. Fibre-reinforced polymer (FRP) composites, particularly Eglass/epoxy and carbon/epoxy systems, have therefore been investigated extensively as replacements, offering high specific strength, corrosion immunity and superior fatigue resistance. Because composite performance is highly sensitive to geometric and laminate parameters, design optimization is essential; Response Surface Methodology (RSM), built on structured Design of Experiments such as Central Composite Design, has emerged as a computationally efficient tool for relating parameters such as thickness, width, fibre orientation and number of layers to stress, deflection and weight through regression-based surrogate models. This review synthesises the published literature on steel and composite leaf spring design, finite element analysis, fatigue behaviour and optimization methods (Taguchi, Genetic Algorithms and RSM), summarises the reported findings and limitations of representative studies, and identifies the research gaps that motivate continued work on RSM-based, experimentally validated composite leaf spring design. Keywords: Composite Leaf Spring; Response Surface Methodology (RSM); Finite Element Analysis (FEA); Design Optimization; Fibre-Reinforced Polymer (FRP
Downloads
Published
Issue
Section
License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.







